Fully automatic PET blow molding machine А-4000-SH
The machine is designed to produce PET bottle from preheated preforms stretched and blown two-steps by means of in quintuple mold. The finished product may vary from 0,25 up to 1,0 in capacity by productivity 4000 BPH.
The machine is designed to produce PET bottle from preheated preforms stretched and blown two-steps by means of in quintuple mold. The finished product may vary from 0,25 up to 2,0 in capacity by productivity 4000 BPH. The machine consists of power unit, furnace for heating preforms, preform autoloader, container with control system.
The preform autoloader is designed for preform orientation and feed them to heating area. The furnace for heating preform is designed for uniform heating of preform and positioning in area capture of gripping holder step by step. The power unit is designed for filing preform on mold and provides product blowing out, taking out of ready product from mold and feed them the next technological line. The use of servo-drivers provides uniform rate and intensifying for more quantity traction of preform before blowing out. Specialized valve terminal with self-diagnostic used for the control of air powered drive. The control of level heating bulb by means industrial and specialized module of control. The machine is equipped with pneumatic devices and servo-drivers, controller and electronics by "FESTO" company.
Bottle neck diameter, mm
Productivity*, max., bottles/h
Blown bottle volume, l
Number of places in the mold, psc
Maximum bottle diameter, mm
Maximum bottle height with neck, mm
Main blowing pressure, MPa
Control pressure, MPa
Total compressed air flow, including: Nm3/min
Coolant temperature, оС
Number of heating units, pcs.
Number of heating zones, pcs.
Power consumption, kW
Supply voltage, V
Overall dimensions, mm:
- autoloader height
Total weight, kg
* Depending on the configuration and volume of blown PET bottles
** The manufacturer does not guarantee the established performance of the equipment when using molds from other manufacturers, non-compliance with the requirements for compressed air, cooling water, electrical connections, and industrial premise