The manufacture of PET bottles

The manufacture of PET bottles

Fully automatic PET blow molding machine А-12000-7

Fully automatic PET blow molding machine А-12000-7

The machine is designed to produce PET bottle from preheated preforms stretched and blown two-steps by means of in seven-seat mold. The finished product may vary from 0,25 up to 2,0 in capacity by productivity 12000 BPH.

Features:
  • Production capacity, max. 12000
  • Blown bottle volume, l. 0.25-2
  • Bottle neck diameter, mm 28 / 38
  • Number of places in the mold, pcs. 7
  • Maximum bottle diameter, mm 105
  • Maximum bottle height with neck, mm 350
Fully automatic PET blow molding machine А-6000-4

Fully automatic PET blow molding machine А-6000-4

Automatic machine is designed for the production of PET-bottles from heated preforms by stretching and two-stage blow molding in quadruple mold.
The equipment allows to manufacture bottles of 0.25 to 2.0 liters capacity for bottling carbonated and still liquids.

The machine is equipped with pneumatic equipment made by leading manufacturers such as "FESTO", "AirCom", and "OMRON" controller and electronics.

Features:
  • Production capacity, max. 6500
  • Blown bottle volume, l. 0,25 - 2
  • Bottle neck diameter, mm 28 and 38
  • Number of places in the mold, pcs. 4
  • Maximum bottle diameter, mm 105
  • Maximum bottle height with neck, mm 350
Fully automatic PET blow molding machine А-8000-5

Fully automatic PET blow molding machine А-8000-5

The machine is designed to produce PET bottle from preheated preforms stretched and blown two-steps by means of in quintuple mold. The finished product may vary from 0,25 up to 2,0 in capacity by productivity 8500 BPH.

Features:
  • Production capacity, max. 8500
  • Blown bottle volume, l. 0.25-2
  • Bottle neck diameter, mm 28 / 38
  • Number of places in the mold, pcs. 5
  • Maximum bottle diameter, mm 105
  • Maximum bottle height with neck, mm 350
Fully automatic PET blow molding machine А-4000-3

Fully automatic PET blow molding machine А-4000-3

Automatic machine is designed for the production of PET-bottles from heated preforms by stretching and two-stage blow molding in a triple mold.
The equipment allows to manufacture bottles of 0.25 to 2.0 liters capacity for bottling carbonated and still liquids.
The machine is equipped with pneumatic equipment made by leading manufacturers such as "FESTO", "AirCom", and "OMRON" controller and electronics.

Features:
  • Production capacity, max. 4000
  • Blown bottle volume, l. 0,25 - 2
  • Bottle neck diameter, mm 28 and 38
  • Number of places in the mold, pcs. 3
  • Maximum bottle diameter, mm 105
  • Maximum bottle height with neck, mm 350
Fully automatic PET blow molding machine А-3000-3

Fully automatic PET blow molding machine А-3000-3

Automatic machine is designed for the production of PET-bottles from heated preforms by stretching and two-stage blow molding in a triple mold.
The equipment allows to manufacture bottles of 0.25 to 2.0 liters capacity for bottling carbonated and still liquids.
The machine is equipped with pneumatic equipment made by leading manufacturers such as "FESTO", "AirCom", "SMC", and "OMRON" controller and electronics.

Features:
  • Production capacity, max. 3000
  • Blown bottle volume, l. 0,25 - 2
  • Bottle neck diameter, mm 28 and 38
  • Number of places in the mold, pcs. 3
  • Maximum bottle diameter, mm 105
  • Maximum bottle height with neck, mm 350
Fully automatic PET blow molding machine А-2000-2

Fully automatic PET blow molding machine А-2000-2

Automatic machine is designed for the production of PET-bottles from heated preforms by stretching and two-stage blow molding in a double mold.
The equipment allows to manufacture bottles of 0.25 to 1.5 liters capacity for bottling carbonated and still liquids.
The machine is equipped with pneumatic equipment made by leading manufacturers "FESTO", "AirCom", "SMC", and "OMRON" controller and electronics.

Features:
  • Production capacity, max. 2100
  • Blown bottle volume, l. 0,25 - 1,5
  • Bottle neck diameter, mm 28 and 38
  • Number of places in the mold, pcs. 2
  • Maximum bottle diameter, mm 105
  • Maximum bottle height with neck, mm 350
Fully automatic PET blow molding machine A-2000F-4

Fully automatic PET blow molding machine A-2000F-4

Automatic machine is designed for the production of PET-bottles from heated preforms by stretching and two-stage blow molding in quadruple mold.
The equipment allows to manufacture flasks of 0.03 to 0.05 liters capacity from special preforms with neck Ø15 mm (for "Raptor" type products)
The machine is equipped with pneumatic equipment made by leading manufacturers such as "FESTO", "AirCom", and "OMRON" controller and electronics.

Features:
  • Production capacity, max. 2000
  • Blown bottle volume, l. 0,03 - 0,05
  • Bottle neck diameter, mm 15
  • Number of places in the mold, pcs. 4
  • Maximum flask diameter, mm 45
  • Maximum flask height under neck, mm 65
Fully automatic PET blow molding machine А-4000-SH

Fully automatic PET blow molding machine А-4000-SH

The machine is designed to produce PET bottle from preheated preforms stretched and blown two-steps by means of in quintuple mold. The finished product may vary from 0,25 up to 1,0 in capacity by productivity 4000 BPH.

Features:
  • Production capacity, max. 4000
  • Blown bottle volume, l. 0,25 - 1
  • Bottle neck diameter, mm 58
  • Number of places in the mold, pcs. 4
  • Maximum bottle diameter, mm 90
  • Maximum bottle height with neck, mm 190
Fully automatic blow molding machine AV-200

Fully automatic blow molding machine AV-200

The machine is designed for the production of PET-bottles (kegs) from heated preforms by stretching and two-stage blow molding in a single mold.  The equipment allows to manufacture bottles (kegs) of 19.0 to 30.0 liters capacity of preforms with neck diameter of up to 60 mm.
The machine is equipped with pneumatic equipment made by leading manufacturers such as "FESTO", "AirCom", and "OMRON" controller and electronics.

Features:
  • Production capacity, max. 200
  • Blown bottle volume, l. 19-30
  • Bottle neck diameter, mm 60
  • Working area of movable plates 520x600
  • Bottle/keg diameter/height (max), mm 280/605
PET blow molding machine PV-7/3

PET blow molding machine PV-7/3

The machine is designed for the production of PET-bottles from heated preforms by stretching and two-stage blow molding in a double (or single) mold.
Equipment for the full process cycle:
  –  semi-automatic blowing machine PV-7/3
  –  furnace for heating preforms PGT-7/3.
The equipment allows to manufacture bottles of 0.2 to 2.0 liters (from 3.0 to 5.0 liters) capacity for bottling carbonated and still liquids.
The machine is equipped with pneumatic equipment made by leading manufacturers "FESTO", "AirCom", and "OMRON" controller and electronics.

Features:
  • Production capacity, max. 700
  • Blown bottle volume, l. 0,2 - 2 or 3-5
  • Bottle neck diameter, mm 28 and 38
  • Number of places in the mold, pcs. 2 or 1
Semi-PET packaging PV-700-1,5

Semi-PET packaging PV-700-1,5

The machine is designed for the production of PET-bottles from preheated preforms by stretching and two-stage blow molding in a double mold.
Equipment for the full process cycle:
–  semi-automatic blow molding machine PV-700-1,5
–   furnace for heating preforms PGT-7/3.
The equipment allows to manufacture bottles of 0.2 to 2.0 liters capacity for bottling carbonated and still liquids.
The machine is equipped with pneumatic equipment made by leading manufacturers such as "FESTO", "AirCom", and "OMRON" controller and electronics.

Features:
  • Production capacity, max. 700
  • Blown bottle volume, l. 0,2 - 2
  • Bottle neck diameter, mm 28 and 38
  • Number of places in the mold, pcs. 2
PET blow molding machine PV-19-40

PET blow molding machine PV-19-40

The machine is designed for the production of PET-bottles and kegs from preheated preforms by stretching and blowing molding in a single mold. Equipment for the full process cycle:
–  Semi automatic blow molding machine PV-19-40
–   Furnace for preheating preforms PGG-19-40.
The equipment allows to manufacture bottles of up to 19.0 liters capacity or kegs of 20.0 to 30.0 liters capacity for bottling carbonated and still liquids.
The machine is equipped with pneumatic equipment made by leading manufacturers such as "FESTO", "AirCom", "SMC", and "OMRON" controller and electronics.

Features:
  • Productivity, up to, max.
  • bottle capacity 19.0 l, pcs./h60
  • keg capacity 20.0 l, pcs./h60
  • keg capacity 30.0 l, pcs./h40
  • Blown bottle volume, l 5,0-19,0
  • Blown keg volume, l 20,0-30,0
Fully automatic PET blow molding machine А-1000-5U

Fully automatic PET blow molding machine А-1000-5U

Automatic machine is designed for the production of PET-bottles from heated preforms by stretching and two-stage blow molding in a double mold.
The equipment allows to manufacture bottles of 3.0 to 6.0 liters capacity for bottling carbonated and still liquids.
The machine is equipped with pneumatic equipment made by leading manufacturers such as "FESTO", "AirCom", "SMC", and "OMRON" controller and electronics.

Features:
  • Production capacity, max. 1450
  • Blown bottle volume, l. 3-6
  • Bottle neck diameter, mm 48
  • Number of places in the mold, pcs. 2
  • Maximum bottle diameter, mm 180
  • Maximum bottle height with neck, mm 350
Fully automatic PET blow molding machine А-1000-5М

Fully automatic PET blow molding machine А-1000-5М

Automatic machine is designed for the production of PET-bottles from heated preforms by stretching and two-stage blow molding in a triple mold.
The equipment allows to manufacture bottles of 3.0 to 6.0 liters capacity for bottling carbonated and still liquids.
The machine is equipped with pneumatic equipment made by leading manufacturers such as "FESTO", "AirCom", "SMC", and "OMRON" controller and electronics.

Features:
  • Production capacity, max. 2200
  • Blown bottle volume, l. 3-6
  • Bottle neck diameter, mm 48
  • Number of places in the mold, pcs. 3
  • Maximum bottle diameter, mm 180
  • Maximum bottle height with neck, mm 360
Fully automatic PET blow molding machine А-1000-10

Fully automatic PET blow molding machine А-1000-10

The machine is intended for the production of PET-bottles from heated preforms by stretching and two-stage blowing in a single mold.
The equipment allows to manufacture bottles from 5.0 to 10.0 liters capacity for bottling carbonated and still liquids.
The machine is equipped with pneumatic equipment of leading manufacturers "FESTO", "AirCom", "SMC", controller and electronics from "OMRON".

Features:
  • Production capacity, max. 800
  • Blown bottle volume, l. 5-10
  • Bottle neck diameter, mm 48
  • Number of places in the mold, pcs. 1
  • Maximum bottle diameter, mm 220
  • Maximum bottle height with neck, mm 480

 

We are on the map

Contacts

352387, Russia, Krasnodar, Kropotkin, Promyshlennaya, 7
trl@missp.ru
+7(861-38) 7-92-98